Now you can fine tune your Blow Off/Diverter Valve to the exact needs of your engine with this complete tuning kit! In the valve tuning kit you will find four springs and three spacers.
The strongest spring is the red, followed by the blue, yellow and finally the green which is the weakest.
If you are finding that the valve is dumping more than required or you are loosing boost pressure it is normally an indication that a stronger spring is required. Conversely if the valve is failing to dump it may be necessary to install a weaker spring. If during this tuning of your valve you are faced for example with the red spring being to strong and the blue spring to weak, you can add the spacers to the blue spring to increase the tension by small increments, thus achieving a setting between the red and blue springs.
Valve Spring color coding
The above figures are estimates only and should only be considered as a guideline
Please note - fitting a stronger spring into a valve will not increase boost pressure unless existing pressure is being lost. Failure to allow the valve to operate by installing a spring which is to strong may cause damage to the turbocharger.
PFS Parts Ltd. is a specialist parts company established in 2003. This site offers a 'one-stop' online parts shop for Saab car parts at great prices. We can supply a huge selection of Saab parts, including genuine Saab parts, aftermarket parts and performance parts. Click for more about PFS Parts...
